Home Use Hammer Mill

  • Working principle

  • The hammer mill is fixed with an engine and a power of RP-driven all kinds of different power. 
  • After the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step by step. Then the crushed materials will be leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge. Finally, the powder material will be discharged down below and the air will be discharged upper.


  • Technical Parameters of Wood Hammer Mills

  • Model
    Power
    Voltage V/50Hz
    Sieve Screen Size
    Sieve Screen Size
    Capacity
    CF158
    2.2KW
    380V
    360*160mm
    1.5-10mm
    60-120kg/h
    CF198
    4KW
    380V
    510*200mm
    2-10mm
    200-300kg/h
    CF198A
    7.5HP
    380V
    510*200mm
    2-10mm
    200-300kg/h
    CF420B
    7.5KW
    380V
    680*280mm
    2-10mm
    200-500kg/h
    CF420C
    11KW
    380V
    680*280mm
    2-10mm
    200-500kg/h
    CF420A
    15HP
    380V
    680*280mm
    2-10mm
    200-500kg/h
    CF420A
    22HP
    380V
    680*280mm
    2-10mm
    200-500kg/h
    CF500
    22KW
    380V
    820*380mm
    2-10mm
    800-1100kg/h
    CF500A
    55HP
    380V
    820*380mm
    2-10mm
    800-1100kg/h
  • Main Features of Wood Hammer Mills

    1. With capacity 60-120kg/h, this hammer mill can satisfy a large production demand on a daily basis. 
    2. The ability to change screen size, and the option of a variable speed frequency drive control, enable processing a variety of materials using the same hammer mill. 
    3. Both coarse and fine grinding can be realized through adjusting the gap between hammers and screen.
    4. The core part ---the hammer flake is scientifically designed to have two concussion parts, thus when one part is worn out, you can turn over to use the other part.
    5. The angle of the screen can be 180° which allows for high throughput at lower power consumption.
    6. Equipped with air blower, the crushed material can be directly collected and transported to next machine for further processing
    Pictures of hammer mill