Wood Hammer Mill Machine

Wood Hammer Mill Machine
Chat Now
Product Details

Product Description

hammer mill---CF420C with cyclone

Hammer mill is new- style and multipurpose machine, it is used for all kinds of straw, cotton stalk, alfalfa, peanuts shell and foodstuffs etc.

2. CF420C hammer mill is driven by 11kw, 380V, 50Hz electrical motor.

3. The capacity of CF420C is 200-500kg/h, it is suitable for home use.

4. It has simple construction, convenient operation, high efficiency and low power consumption.

5. CF420 can also be driven by 15hp diesel or 22hp diesel engine, we called it CF420A.

Diesel engine Driven CF420A Wood Hammer Mill

CF420C Hammer Mill Testing on 22 April, 2016

Working principle

The hammer mill is fixed with an engine and a power of RP-driven all kinds of different power. 

After the raw materials were put into crushing chamber, the high-speed operated hammer sheets will impact the raw materials over and over again, then the raw materials will be crushed into pre-set size step by step. Then the crushed materials will be leak out from the sieve. The draught fan will convey the leaked materials into separator centrifuge. Finally, the powder material will be discharged down below and the air will be discharged upper.

More videos on Youtube:

https://www.youtube.com/channel/UCw4kMpiLCH5b3gEunR4cDcg

Our video on Youtube.

Welcome to click it.

Technical Parameters of Wood Hammer Mills

Model

Power

Voltage V/50Hz

Sieve Screen Size

Sieve Screen Size

Capacity

CF158

2.2KW

380V

360*160mm

1.5-10mm

60-120kg/h

CF198

4KW

380V

510*200mm

2-10mm

200-300kg/h

CF198A

7.5HP

380V

510*200mm

2-10mm

200-300kg/h

CF420B

7.5KW

380V

680*280mm

2-10mm

200-500kg/h

CF420C

11KW

380V

680*280mm

2-10mm

200-500kg/h

CF420A

15HP

380V

680*280mm

2-10mm

200-500kg/h

CF420A

22HP

380V

680*280mm

2-10mm

200-500kg/h

CF500

22KW

380V

820*380mm

2-10mm

800-1100kg/h

CF500A

55HP

380V

820*380mm

2-10mm

800-1100kg/h

Main Features of Wood Hammer Mills

1. With capacity 60-120kg/h, this hammer mill can satisfy a large production demand on a daily basis. 
2. The ability to change screen size, and the option of a variable speed frequency drive control, enable processing a variety of materials using the same hammer mill. 
3. Both coarse and fine grinding can be realized through adjusting the gap between hammers and screen.
4. The core part ---the hammer flake is scientifically designed to have two concussion parts, thus when one part is worn out, you can turn over to use the other part.
5. The angle of the screen can be 180° which allows for high throughput at lower power consumption.
6. Equipped with air blower, the crushed material can be directly collected and transported to next machine for further processing

Just contact me if you have any questions.

Welcome to visit our company.

Feedback